Articles on: Omega Google Ads, Ga4 & GTM

Omega Google Ads: Ad return, Revenue by channel and Google Ads customers

What are these metrics?

Google Ads reports its own numbers, which include view-through conversions, other devices and Google's attribution model. That makes them hard to compare with the orders in your store. These new metrics answer three questions from your own Shopify orders:

  1. How much revenue does Google Ads bring back for every dollar I spend?
  2. How much of my store's revenue comes from Google Ads?
  3. Is that revenue from new customers or from returning customers?

They sit inside the screens you already use, no new tab:

  • Order tab: two new sections, Ad return and Revenue by channel.
  • Buyer tab: one new section, Google Ads customers, and the Cost per acquisition box becomes CPA (Google Ads).

Everything that was already on the Order and Buyer tabs stays as it was: Total revenue, Orders, AOV, POAS, Buyers, Repeat buyers, Buyer lifetime value, Retention rate, Churn rate, the refund and cancel numbers, the charts, the daily table and the Audience signals for Google Ads block. The one exception is the Cost per acquisition box (see "CPA (Google Ads)" below).




Which orders count as Google Ads orders?

All Google Ads metrics use one set of orders. An order is a Google Ads order when its landing URL has:

  • a click ID: gclid, gbraid or wbraid, or
  • utm_source=google together with utm_medium=cpc

An order with only utm_source=google (no cpc, no click ID) is not a Google Ads order. An order with both a click ID and UTM still counts once.
Other rules:

  • Revenue of an order is counted the same way as Total revenue.
  • Every number is counted on the day the order was created.
  • An order that ended with no money received (cancelled, or fully refunded) is not a purchase here. It is left out of revenue, buyers and the new customer share. It stays in the base of Refund rate and Cancel rate. Example: 100 Google Ads orders, 4 cancelled, Cancel rate is 4% (not 4 ÷ 96).


Order tab

Ad return

Metric

What it tells you

Formula

Ads ROAS

Revenue you get back for every dollar spent on Google Ads, based on your Shopify orders.

Ads revenue ÷ Ad spend

Ads revenue

Revenue from orders that came from a Google Ads click, counted like Total revenue.

Sum of revenue from Google Ads orders

Ad spend

What you spent on Google Ads in the period, from your Google Ads account.

Sum of campaign cost

Example: Ads revenue $12,480 and Ad spend $3,900 give an Ads ROAS of 3.20x.

  • Ad spend comes from the same cost source as POAS and adds up all connected Google Ads accounts.
  • If Ad spend is 0, or Google Ads is not connected, Ads ROAS and Ad spend show Not enough data. Ads revenue still shows a number, because it comes from orders.
  • Hover a point on the Ads ROAS chart to see all three numbers of that point: Ads ROAS, Ads revenue and Ad spend.
Revenue by channel

One card with:

  • Google Ads share = Ads revenue ÷ Total revenue.
  • A rank chip: Top channel when Google Ads is first, otherwise its rank and the channel right above it, for example 2nd after Direct or 3rd after Email and SMS.
  • A donut chart and a list of channels. Each row has the channel name, a share bar, revenue and percent. In the middle of the donut: the total revenue and the number of orders of the period (for example $32.8k and 412 orders).

The 7 channels are Direct, Google Ads, Email and SMS, Organic search, Other paid, Social and Unknown. The list is sorted by revenue, with Unknown always last. Hover a slice of the donut to see the channel, revenue and percent.

Channel row

Meaning

Direct

Orders with no UTM source and no click ID.

Unknown

Orders with a UTM source the app does not recognise as one of the other channels.

Cancelled and fully refunded (a line under Unknown)

Revenue of orders that ended with no money received. They are not given to any channel, so channel shares and Ads ROAS are not inflated. It has no share bar and is not in the donut. Formula: Total revenue minus revenue of the channels above. Shows $0 when there are none.

How orders are assigned:

  • Each order belongs to one channel only.
  • Google Ads orders are assigned first. Then the remaining orders go through the same channel logic as the UTM report in Shopify Flow. This matters because an order with only a click ID and no UTM would otherwise land in Direct or Unknown and be counted twice.
  • The 7 channels plus the Cancelled and fully refunded line add up to Total revenue. The 7 channels alone can be lower than Total revenue, this is correct.
  • The app does not store the referrer, so it is not used to split channels.

Why this can differ from the UTM report in Shopify Flow: the Google Ads row, and the channel that "lost" orders to Google Ads, can differ from that report on purpose. The other channels should match.


Buyer tab

CPA (Google Ads) replacess Cost per acquisition

The box in the top row, in the same position, now reads CPA (Google Ads).



What it tells you

Average ad spend for each buyer who came from Google Ads, new or returning.

Formula

Ad spend ÷ Buyers from Google Ads orders

Why it changed: the old box divided the ad spend by every buyer of the store, including buyers who did not come from ads, so the number had little meaning. The new box divides only by buyers from Google Ads orders. Example: $3,900 ÷ 139 buyers = $28.06. Expect the number to look different from the old one.

  • A buyer from Google Ads is a unique customer with at least one Google Ads order that has revenue in the period (new or returning).
  • CPA does not split the cost between new and returning customers, because ad cost brings both and the app cannot separate it.
  • It is a plain number box like the others in that row, with no trend chart.
  • No Google Ads buyers in the period, or Google Ads not connected: Not enough data.
  • The column in the daily table is still named Cost per Acquisition (CPA) even though its data is ad spend. It is not changed in this release.
Google Ads customers

New customer share = Ads revenue from new customers ÷ Ads revenue. Example: $4,182 ÷ $12,480 = 34%.

  • "New" means a first purchase in your store (first-purchase orders, FC). Returning means repeat purchase orders (RC).
  • A customer with both a first and a repeat order in the same period counts as one new customer. Their revenue is still split by order: the first order goes to new customers, the repeat order to returning customers.
  • The chart is a stacked column per point in time (new and returning). Hover a column to see new customer revenue, returning customer revenue and the new customer share. It does not show customer counts.

Google Ads orders vs all orders is a table with two columns, Google Ads orders and All orders, for the same period:

Row

What it tells you

Formula

New customer share

Share of revenue from orders that were the buyer's first purchase in your store.

Revenue from first purchase orders ÷ Revenue

AOV

Average revenue per order.

Revenue ÷ Orders

Refund rate

Share of orders that had a refund.

Refund orders ÷ Orders

Cancel rate

Share of orders that were cancelled.

Cancelled orders ÷ Orders

  • All orders is calculated on every order of the store, the same scope as Total revenue.
  • The New customer share row in the Google Ads column always equals the main number of the New customer share card.
  • If there are no Google Ads buyers, the Google Ads column shows Not enough data. If Google Ads is not connected, New customer share and the table still work, because they come from orders.
New customer share and the first purchase / repeat purchase split rely on the FC Purchase and RC Purchase events. If you do not turn these events on, Omega has no first purchase or repeat purchase label on your orders, so these metrics will have no data.


You can turn them on in Omega → Market & Events → Conversion Events.


Reading the cards

  • Change vs previous period. The new cards show the change against the period just before, with the same length. For money and counts it is the percent change, for example +24.8% vs previous period. A drop is written Down 3.2%. For a rate in % (like New customer share) it is the difference between the two rates, for example 31.9% to 34% shows +2.1%.
  • Colors. Green means good, red means bad (not the sign). Higher is good for Ads ROAS, Ads revenue, Google Ads share and New customer share. Lower is good for CPA (Google Ads). Ad spend is grey, neither good nor bad.
  • Tooltips. Hover a metric name to see its Definition and Formula.
  • Charts and missing data. The way time is split on charts, the tooltip of each point, the comparison with the previous period and the Not enough data display work exactly like the existing charts in the app.
  • Many points in time. A buyer who buys at several points in the period counts at each point, so the sum of buyers per point can be higher than the buyers of the whole period. The CPA of the period also is not the average of the CPA of each point. This is correct.

Date filter, Metrics menu and plans

  • The date filter behaves as before. On the Buyer tab, Free and Starter see demo data (the tab shows You are viewing Buyer Analytics with demo data.), including the new Google Ads customers section and the CPA (Google Ads) box, and the date filter there is view only.
  • The Metrics menu has new groups: Ad return and Revenue by channel on the Order tab, Google Ads customers on the Buyer tab. CPA (Google Ads) stays in the group where Cost per acquisition was. Uncheck cards and Apply to hide them. If all cards of a section are unchecked, the whole section is hidden.
  • If you saved your own list of metrics before, nothing breaks. The new cards appear selected by default.


Why these numbers differ from Google Ads

  • Ads ROAS here is calculated from your Shopify orders. It is often lower than the ROAS Google reports, because Google also counts view-through conversions, other devices and its own attribution model.
  • Ad spend only includes Google Ads accounts connected to Omega. If a store runs another Google Ads account that is not connected, its cost is not in Ad spend, while orders from its ads can still be in Ads revenue. Ads ROAS is then higher than the real value.


Support cases

Customer says / keyword

What it means

How CS supports

"My Ads ROAS is lower than in Google Ads"

Ads ROAS uses Shopify orders only. Google's ROAS includes view-through, other devices and its attribution model.

Explain the two numbers answer different questions. The one in Omega is easier to match with real orders.

"My Ads ROAS looks too high"

Another Google Ads account that is not connected to Omega may be spending, while its orders still count in Ads revenue.

Ask whether they run other Google Ads accounts that are not connected to Omega.

"Ads ROAS and Ad spend say Not enough data"

Google Ads is not connected, or Ad spend is 0 in the period.

Check the Google connection. Ads revenue still shows.

"My CPA changed a lot"

The box now divides ad spend by buyers from Google Ads only, not by all buyers. The old number was divided by everyone.

Explain the change with the example $3,900 ÷ 139 = $28.06.

"The CPA column in the table does not match the box"

The column in the daily table keeps the old name but shows ad spend.

Tell them the column name is unchanged for now.

"Google Ads share does not match the UTM report from Shopify Flow"

Google Ads orders are assigned to Google Ads first, including orders with only a click ID. This is on purpose.

Explain the rule. The other channels should match the report.

"The channels do not add up to Total revenue"

Cancelled and fully refunded orders are not in any channel.

Point to the Cancelled and fully refunded line under Unknown. Seven channels plus that line equal Total revenue.

"A cancelled Google Ads order is not in my Ads revenue"

Orders with no money received are left out on purpose, so ROAS and share are not inflated.

Explain. It still counts in Cancel rate.

"Why is an order with utm_source=google not in Google Ads?"

It needs utm_medium=cpc as well, or a click ID.

Explain the definition.

"Where is Cost per acquisition?"

It is now CPA (Google Ads), same place.

Show the box in the top row of the Buyer tab.

"I see demo data on the Buyer tab"

Free and Starter see demo data on the whole Buyer tab.

Explain the plan limit.

"The sum of buyers by day is higher than my total buyers"

A buyer who buys on several days counts on each day.

Explain this is correct.

"Some customers are both new and returning"

A customer with a first and a repeat order in the same period counts once, as a new customer.

Explain how revenue is split by order.

Before escalating to dev, collect: store domain, plan, the date range, a screenshot of the card and of the Purchase Events Table filtered to the orders in question, the Google Ads accounts connected, and the order names that look wrong.


FAQ

  1. Do I need to turn anything on? No. The new cards appear on the Order and Buyer tabs. You can hide them in the Metrics menu.
  2. Are my old metrics changed? No, except the Cost per acquisition box, which is now CPA (Google Ads).
  3. Does this change how conversions are sent to Google Ads? No. These metrics only read your orders and your Google Ads cost.
  4. Why does a store with few orders see big swings? The numbers are real, and with few orders each order moves the rate a lot.

Updated on: 16/11/2026

Was this article helpful?

Share your feedback

Cancel

Thank you!